How to fix laminate flooring gaps HowToSpecialist — How to Build, Step by Step DIY Plans

How to fix laminate flooring gaps HowToSpecialist - How to Build, Step by Step DIY Plans

How to fix laminate flooring gaps

This article is about how to fix laminate flooring gaps. There are certain situations in which either due to poor installation or changes in temperature and humidity, the laminate planks move from their position or change their volume, creating joint gaps. Beside the unattractive appearance, the gaps between the laminate boards might damage in time the floor and lead to delamination or chipping. Therefore, we recommend you to follow our guidelines as to prepare the floor surface and to lay the laminate flooring in a professional manner. Generally speaking, there are several elements which might create the laminate flooring gaps, so we recommend you to pay attention to our article, as to prevent a poor installation.

It is essential to acclimatise the laminate boards before installing them. This is one of the main causes of gaps between the laminate planks. Therefore, we recommend you to deposit the laminate packs in the room, for at least 48 hours before starting the installation process. There are many diy-ers which are eager to install the laminate flooring and neglect the preparation steps, and ending up with gaps in the flooring.

The sub-floor must be perfectly level. The laminate flooring manufacturers require a level surface, otherwise they cannot guarantee a proper laminate flooring. Therefore, we recommend you to use a 4 spirit level, as to check the surface and pour auto-leveling screed if necessary. In addition, use a large scraper to remove the bumps and other residues on the floor.

Fixing Laminate Flooring Gaps

If the gaps are too large or you just dont have a proper access to the ends of the laminate flooring ends, you have two alternatives: filling he gaps with wood filler or removing the planks with issues and installing them again.

Smart tip: In order to have access to the laminate flooring planks, you should start by removing the baseboard trims. Afterwards, remove the laminate flooring planks, one by one, until you reach the area with issues.

Fixing the gaps

Remove the planks with problems and check if they are in a good condition. Check the boards attentively, especially the tongue and the grooves. If the planks are in a good condition, you can use them, making sure you connect them properly. On the other hand, if the planks are damaged, you should use new ones, otherwise you will face the same issues over the long run.

If the gaps are significant, this is the best technique to get the job done, as filling them with a wood filler wont sole the root of the problem.

Useful Reading

Install uderlayment  for the laminate flooring, as to protect the room against losses of heat, to improve the sub-floor irregularities and to reduce sounds transmitted to the below room. The underlayment comes either in rolls or boards of different thicknesses, so it shouldnt be hard to find a product to satisfy your needs.

How to fit laminate floor

It is essential to connect the laminate boards  properly, otherwise there will appear gaps between the joints. Clean the tongue and the groove of all laminate boards, making sure you remove the dust and residues. In addition, make sure you install the laminate flooring in a perfect straight line and stop if you notice the slightest misalignment, as these flaws will only amplify as you continue the project. On the other hand, do not install laminate planks that are cracked, curved or have any other damage.

If the gaps are larger than 1/10, then you might have a problem with the air humidity. The laminate flooring boards react to air humidity and temperature. therefore you have to acclimatize them prior to the installation  and maintain a constant humidity in the room. In order to fix the laminate flooring gaps, you could bond the laminate planks together, by applying glue in their grooves. Nevertheless, make sure you dont glue the laminate boards to the sub-floor. Remember that if you follow this approach, you wont be able to remove the laminate floor without damaging it.

How to fix laminate flooring gaps

Gaps between laminate flooring

The gaps between the laminate planks have a poor appearance and might damage the flooring, if you dont take action quickly. Nevertheless, there are situation in which the gaps are just to large to be able to fix them without reinstalling the laminate planks.

Therefore, if the gaps are larger than the one in the image, we recommend you to remove the laminate boards and prepare the surface properly before re-installing them.

Closing gaps between laminate flooring

One of the easiest solutions for this problem is to use a boot with adherent sole. and to try to hide the laminate flooring gaps by hitting several times the boards. If the gaps dont shrink you dont have any solution other than either filling the gaps with colored paste (with a syringe), using a pull bar or re-installing the flooring after you level the base surface.

Smart tip:  Make sure you dont apply too much force, otherwise you might damage the laminate planks. In addition, clean the boots with water before trying to fix the flooring gaps.

Fixing laminate planks gaps

In our case, this solution proved to be successful, as the problem was not caused by poor installation, but by a change in air humidity. As there are many situations in which we cannot control the humidity and the temperature, using a boot is an easy fix for any home owner.

Nevertheless, if the gaps are too large. you have to remove the baseboard trims, fill the gaps with wood glue and tap the boards with a mallet or a pull bar. Make sure you apply glue only in the groove of the laminate and not on the sub-floor.

Thank you for reading our article on how to fix laminate flooring gaps  and we recommend you to check out the rest of our articles.  Dont forget to share our projects with others by using the social media widgets, if you have found them useful.

 Related projects:

Leave a Reply