How To DIY Painted Floors

How To DIY Painted Floors

How To: DIY Painted Floors

Send to a Friend via Email

Recipient’s Email

This field is required.

Separate multiple addresses with commas. Limited to 10 recipients. We will not share any of the email addresses on this form with third parties.

Are your wood floors in dire need of repair, refinishing or (worse) replacement? Replacing or refinishing an old wood floor can be a time-consuming and expensive home project — one many homeowners ignore and literally sweep under the rug (with a fresh area rug over problem spots, of course). If you don’t have the energy or budget to refinish or replace old wood floors, instead of the rug trick try updating them with paint. All you will need are the right tools and a perfect paint color — and maybe a great pattern idea to create a custom design that will liven up any drab surface.

Even if your floors aren’t damaged or dingy, using this paint idea is a great way to customize a space or add personality to a boring room. Illinois-based interior designer Jeannie Balsam has used the flooring paint trick for creating custom looks for her clients, as well as in her own design studio.

An inexpensive and easy update is to paint an old staircase. treads, thresholds or trim with glossy floor paint, Balsam says. The space immediately feels fresh and modern. To add a little interest, you can also incorporate numbers or words on the treads.

If the room in question gets a lot of foot traffic, it might be best to lay rugs over the painted area to prevent extra wear-and-tear. Keep in mind though, It’s not an ideal technique for the office, Balsam says, as rolling desk chairs pick up a lot of paint.

If your desired color palette for the floors are black or white, Balsam adds, be prepared to sweep, sweep, sweep because every speck of dirt or pet hair will show. I would love to try a beautiful aqua-colored floor that might not show dust as much.

Whether you want to paint wood floors, stairs or trim, consider this DIY home decor project to give any surface a dose of personality.

Time: approximately three days

Materials:

Sanding sponge

Sponge

Paintbrush

Pencil

Ruler

Porch or floor paint

Polyurethane

Steps:

1. Give the wood floor surface some traction and even out rough spots by grazing over them with a sanding sponge. With a damp sponge, wipe away sanding residue and allow it to dry.

2. Tape off all the areas you want to protect from the paint, such as baseboards. With a paintbrush, begin by painting your base color a few inches around the perimeter of the painting area. With a roller, fill in the rest of the area. Let dry and paint another coat if needed. Let dry overnight.

Skip to step 6 if you’re painting a solid color. If you’re painting a pattern*, follow steps 3 through 5.

3. Measure and tape off your chosen design (remember to measure twice and paint once!). Using painter’s tape, mark the areas you don’t want to paint with an X. Next, rough up the areas to be painted with a sanding sponge. Then wipe away sanded areas and stray pencil marks with a damp sponge (a pencil eraser can damage the base coat). Let dry.

4. With a paint brush. paint your pattern. Clean up any drips or spills right away with a damp sponge.

5. Before the paint dries, carefully peel away the tape from the floor at an angle.

6. Let paint dry for a day. Once the floor is fully dry, apply a coat of polyurethane with a paint roller to seal in the new design against heavy foot traffic.


Leave a Reply