DiscountPaint Last-n-Last Absco Polyurethane Wood Floor Finish 350-VOC

DiscountPaint Last-n-Last Absco Polyurethane Wood Floor Finish 350-VOC

Last-n-Last Absco Polyurethane Wood Floor Finish 350-VOC

Last n Last Absco Polyurethane Wood Floor Finish 350-VOC

ABSCO Professional Polyurethanes offers the latest technology in environmentally compliant wood floor finishes. ABSCOs high solid content will beautify and protect most commercial and residential wood floors, providing years of enjoyment. ABSCO can also offer superior protection to most interior wood surfaces, such as handrails, trims, furniture and cabinets.

RECOMMENDED USES:

Absco Polyurethane Wood Floor Finish is recommended for most interior commercial and residential wood.

TYPICAL PROPERTIES

Color in Container: Gloss -Clear / Satin Hazy / Semi-Gloss Hazy

Solids Content/weight: Gloss 58+/-2 / Semi-Gloss & Satin 55+/-2

Chemical Resistance: Excellent

VOC: VOC does not exceed 350 grams/liter

Flash Point: 105F

Sheen Gloss: No less than 90 units on wood.

Satin: No less than 25-35 units on wood.

Semi-Gloss: 50-60 units on wood.

Matte: 10-20 units on wood

Freeze/Thaw Stability: Stable

Shelf Life: Unlimited in unopened container

Drying Time: 12 hours under good conditions

Cleanup: Mineral Spirits, Paint Thinner, Turpentine

Application Method: Lambs wool applicator, natural bristle brush.

Coverage Approx: 500-600 sq. feet per gallon on raw wood.

Proper surface preparation is essential to achieve a high quality finish. Read the MSDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

Surface Preparation:

New or Newly Sanded Floors or Wood Surfaces:Prepare the floor according to NWFA or NOFMA accepted standard. The final pass before application of Absco Polyurethane Wood Floor Finish and sealer should be a #100 to #150 grit screen pad or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax. The floor or work surface and room temperature should be at least 65F.

Previously Finished Floors or Wood Surfaces:Remove old finish in poor condition. Screen the floor or work surface with a#100 to #150 screen disc, #180 grit sand paper, maroon pad or similar. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax. The floor or work surface and room temperature should be at least 65F.

REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.

APPLICATION:

Apply the finish with the grain of the wood. Apply in well ventilated area by brush, roller, spray, or lambswool applicator at room temperature and not in direct sunlight. When using a roller, work slowly to avoid air bubbles. Screen the floor or work surface in between coats with any of the following #150 screen disc, #180 grit sand paper, maroon pad or similar in between coats. Remember to vacuum and tack thoroughly after screening to remove all dust. Heavy finish application, high humidity or lack of airflow will extend drying times. If waiting longer than 24 hours between coats, sanding is recommended.

APPLICATION OVER STAIN: Absco Polyurethane Wood Floor Finish should adhere well to most stain. If a stain other than LastnLast stain is to be used a test for adhesion is recommended. Use LastnLast Classic Wood Stain following instruction on label. Allow the stain to dry a minimum of 24 hours under good conditions. Make sure the stain is completely dry before applying the Finish.

DRYING TIME:

When applied according to directions, and in thin coats, Absco Polyurethane Wood Floor Finish should be dry to the touch in 6-8 hour. Allow minimum of 12 hours between coats. Heavy finish application, high humidity or lack of airflow will extend drying times. Absco Polyurethane Wood Finish completely cures within 2 weeks.

CLEAN-UP:

Use paint thinner, mineral spirits or turpentine to clean brushes and applicators.

MAINTENANCE:

Absco Polyurethane Wood Floor Finish never needs waxing. We recommend Polycare Floor Cleaner as the safe and effective cleaning product for all polyurethane coated surfaces. It has a unique soap-free, no rinse formula which will not harm polyurethane or varnished wood surfaces.

Leave a Reply