High Traffic Commercial Vinyl Floor Tiles and Sheets

High Traffic Commercial Vinyl Floor Tiles and Sheets

Characteristics and Considerations of Vinyl in High Traffic Areas

Send to a Friend via Email

Recipient’s Email

This field is required.

Separate multiple addresses with commas. Limited to 10 recipients. We will not share any of the email addresses on this form with third parties.

Vinyl is a popular flooring material for many commercial applications. It is water resistant and low maintenance which helps to control upkeep costs, and it is relatively durable so you will not have to replace it very often. It is also available in a wide variety of colors, textures, and style options. It can even be printed to simulate the look of hardwood, stone, or ceramic.

When it comes to commercial vinyl flooring you get what you pay for. The quality of the material that you purchase will have a direct impact on how well it will withstand the rigors of varying levels of foot traffic.

With printed vinyl tile you have to be concerned about the thickness of the wear layer, the invisible coating that extends over the surface of the material, protecting it. Low end printed vinyl will have a 10 millimeter wear layer, while higher grade commercial materials will be closer to 30 millimeters.

With solid vinyl. or vinyl composite. the colors are homogenous through the entire piece of material dimensionally, so you don’t have to worry about them fading away through wear. However you still want to purchase a quality product to ensure that manufacturer defects do not cause the structure of the material to degrade over time.

Commercial Vinyl Warranties

In many cases the residential and the commercial warranty on materials will vary. Make sure that the distributor knows the level of traffic that you are expecting, so that they can accurately adjust the warranty to your specific situation.

Remember that the warranty only covers manufacturer defects. These are most often miss-prints of colors or sheets and tiles that do not line up properly. It does not cover installer mistakes, which are the most common cause of vinyl flooring problems later on down the line.

Long Term Issues With Commercial Vinyl Floors

Dulling of the Vinyl’s Surface Finish is probably the most common long term issue that you are going to have with a commercial installation. This is caused by small pieces of dirt, sand, and debris being tracked across the floor by shoes and the wind. As these tiny particles scrape across the floor they act like the grits of a piece of sandpaper, scratching and marring the surface of the vinyl, and wearing away any finish or surface layer that might be on it.

Solutions: The easiest way to prevent dulling of your vinyl floors is to keep them free of those tiny particles that can harm them. Sweeping, vacuuming, or mopping periodically can do a lot to help protect a vinyl floor in a high traffic area. The use of place mats at entrances and exterior doorways can also help to trap some of the debris before it is able to get inside to the floor where it can do harm.

Commercial floor sealers are also available which can help to create a stain resistant, wear durable invisible layer over the surface of the floor. However you have to be very careful that you pick a sealing or finishing agent which is formulated to work with the specific type of vinyl that you have. In some cases using the wrong seal or finish can create a permanent murky layer across the floor.

High Traffic Commercial Vinyl Floor Tiles and Sheets

Discoloration of Commercial Vinyl Floors is something which happens over time due to the buildup of dirt, oil, and asphalt sealers which are tracked into the room from exterior locations. The rubber in some shoes can even cause slight discolorations in the floor if the heel scuffs against the vinyl.

Prolonged exposure to heat, or direct sunlight will also discolor the material, causing it to take on a yellowish color.

Solutions: Regular cleaning will help to remove the oils and greases which will discolor vinyl over time. Place mats set at entrances and exits will also help to cut down on mud and other staining agents that get tracked in. The use of curtains in places where windows and glass doors shine direct sunlight down on the floor can help prevent yellowing effects. However vinyl should not be installed in areas of high heat output such as near heating ducts and vents.

You may also want to consider stripping the finish from a commercial vinyl floor once or twice a year. This will completely remove all surface build up, including the sealant layer, and any oils or greases that have coated over it. Once stripped the vinyl will be restored to its original state, and then can be refinished.

Surface Dents and Damage to the floor can be caused by a variety of issues. Heavy furniture scraping across the floor can cause gouges and scratches. Sharp unprotected chair legs can also severely mar a commercial vinyl floor in a cafeteria or eating area. Even some un-padded high heels can cause damage to the floors surface.

Solutions: If the scratches and dents are small then you can use liquid seam filler to repair them. Make sure that the vinyl is clean and dry, and then apply a small amount of the clear liquid to the blemish, being sure to smooth it out so it does not create bubbles or a mound. As it dries it should cause smaller blemishes to vanish.

If you have vinyl tiles installed than individual pieces can be repaired if they become severely damaged. With sheet vinyl you have the option of removing the affected area and replacing it with a matched patch.

More Vinyl Flooring Information

Leave a Reply