Heated Tile Floor Heated Tile Floor

Heated Tile Floor Heated Tile Floor



Luxury Is A Heated Tile Floor For Your New Custom Home

There are many benefits to installing a heated tile floor system in your home today, one of which is the lowered cost over the lifetime of the heating system. Each room is zoned and has its own thermostat so every member of the family can sleep comfortably at night. This sort of heating system can be installed in homes that have already been constructed, but it is very easy to choose as an option in the planning stages of a new custom built home. In decades past floor heating was a very expensive, and quite costly to maintain, as the first systems were not electric, but hot produce heat from hot water.

The old hot water system was perfected as much as possible in London forty to fifty years ago and it slowly made its way across the pond. People in the northern states were of course the first to try this supposed miracle heating system, and it came back with mixed reviews. The tiny network of water pipes would either rupture or corrode and start leaking, and could easily flood the entire home. Today, a heated tile floor cost much less than the older water piped design, and if it does fail, the computer built into the rooms thermostat can pinpoint the problem location and make the repair process very quick.

The heated tile floor installation is very simple during the floor installation process, and is a rolled up mesh that is laid out strategically on the concrete foundation, and then it is covered in thinset, then the tile or hardwood flooring is applied. Prior to installation of a home being renovated you will need to hire a licensed electrician to come install the connection points in each zone or room, and have a separate fifteen to twenty amp GFI circuit put in place too. Everything should be tested before permanently installing the one to two foot wide mesh strips that hold the heating elements in place.

The other benefits of using heated tile floors in a home is that it can drastically reduce your electric bill, as your central heat will cycle on and off much less if any in the future. There are no moving parts to wear out, as with your central unit, and barring any physical damage to the heating cords, it will last practically forever. In addition, for any room in your home that is not being used currently you can separately shutdown the floor heating circuit in that room to save even more money. The latest models sport wireless remotes, so a person can literally adjust the temperature settings without having to get out of bed in the middle of the night.

Using heated tile flooring in a home that is on piers, or has a basement will require the addition of a sub-flooring, due to the fact that basic plywood floors move, and or flex when walked on, and this could cause undo pressure on the heating elements, and break them. Quite honestly, you can also do partial installations throughout your home, to heat the most used rooms in the house. This will still save money and you will not have endured that hot dry air anymore while trying to relax in your living or bedroom in the evening.

Radiant heated flooring was mainly just used in bathrooms, at first since most people did not want to step on that cold tile to get ready on winter mornings. This is still an option, and the average cost of the system, not including the tile, or electrical work will run about four to seven hundred dollars for a master bathroom. Many homeowners find that they love it so much in their bathroom, that they will almost always expand it to the bedroom, and living room too.

Leave a Reply