Tongue-and-groove (Home) — Definition — Online Encyclopedia

Tongue-and-groove (Home) - Definition - Online Encyclopedia


If your home has wood boards, here’s a list of what you’ll need to remove and replace the old sections.

tongue-and-groove lumber (bois embouvetй, m.) Any lumber. such as boards or planks, machined in such a manner that there is a groove on one edge and a corresponding tongue on the other.

tooled joint See joints.


Tighter spacing and systems create a slightly different deck appearance and partially shed water .

Tongue-and-groove » A joint made by a tongue (a rib on one edge of a board) that fits into a corresponding groove in the edge of another board to make a tight flush joint. Typically, the subfloor plywood is tongue-and-groove .

Pliers: Commonly called by the brand name Channellocks, these pliers are the first tool plumbers reach for when they need to grab, pull, twist, hold, tighten or loosen something. Be sure to get two sizes: 10-in.

Tongue-and-groove panelling adds New England-style charm to the spare room (in what used to be the butler’s pantry ) of this 1830s London house restored to its original style by interior design er Max Rollitt.


Joint where the projection or «tongue» of one member engages the mating groove of the adjacent member to minimize relative deflection and air infiltration; widely used in sheathing. flooring and paneling .

Tongue-and-Groove Flooring What is tongue and groove flooring. Tongue-and-groove flooring defined.


Sandpaper What is sandpaper and how is sandpaper used in home renovation projects?

ceiling s are composed of interlocking lips intended to hide nails from sight. When it comes to finishing a ceiling. success has more to do with procedure than style.

Tongue-and-groove wood panelling, freestanding furniture. and open shelving are the quickest ways to create a country look. Add shade s of peppermint green and candy pink next to floral and polka dot fabrics for Fifties-inspired cottage chic.

Carpentry joint in which the jutting edge of one board fits into the grooved end of a similar board.

Tongue-and-Groove Joint

A joint formed by the insertion of the tongue’ of one wood member into the groove’ of the other; modifications include tongue and groove rabbet joint, dado tongue and rabbet. tongued shoulder joint.

The planks replaced outdated acoustic ceiling tile giving added architectural interest. Hefty crown molding adds to the traditional feel of the space. The granite countertops add a sense of weight and color.

8. The tongue-and-groove chipboard floor boards are held in place with screws. A water -resistant grade is a good choice, and essential in the bath or shower room .

Used for food prep and washing up, this scullery has an expansive, rustic butcher block counter. two dishwasher s and lots of storage space.

Once the tongue-and-groove boards were in place, we needed to cover them as soon as possible with a layer of 15-pound roofing felt. This protects the boards from any rain or moisture you might get during the rest of the roof construction .

Warning: flooring can’t be sanded and refinished as many times as planks can. Also, the planks should be at least 3/4 to 7/8 thick.

Blind nailing tongue-and-groove boards hides the fasteners. Each fastener is driven through one board’s tongue, and covered by the next adjacent board.

strip, narrow boards, which are cut in random lengths planks, tongue and groove boards.

In cases where the gap or coverage is not adjustable. as in tongue-and-groove flooring. you have to make up part of the discrepancy at the start and the rest at the end. Say you’re installing flooring between two walls that are 1 in.

Tongue-and-groove (Home) - Definition - Online Encyclopedia

Most ceiling tiles have edges for easier installation. You can choose from plain, embossed and patterned finishes.

The well should be cased with a water tight material (for example, tongue-and-groove precast concrete ) and a cement grout or bentoniteclay sealant poured along the outside of the casing to the top of the well.

Each sauna is constructed from Canadian cedar, basswood or teak.

They snap together with tongue-and-groove joints and then float» on top of the floor. meaning they are not fastened directly to the subfloor or underlayment .

When removing and reusing paneling. drive nails through the tongues with hammer and nailset, then lift the wood away. Drive protruding nails into the wall framing .

Hardwood s such as oak, maple and ash are harvested, sawn and fashioned into tongue-and-groove boards of various lengths and widths, ranging from 12 to 84 inches in length, 2 ВЅ to 5 inches wide and Вѕ inch thick.

Integrally colored plaster walls and a distressed finish on the cabinetry add patina to this new kitchen. Beauharnais limestone was used for the countertop. backsplash, and floor .

Now this is called tongue-and-groove paneling. Why, because each piece has a tongue and a groove. A tongue on one side, a groove on the other side.

WOODHAVEN CEILING PLANKS Made from medium-density fiberboard, the boards won’t warp and they clean up with the wipe of a sponge. Available in natural, shown, and white-painted finishes. $3 to $3.25 a square foot.

Build the main door out of 2×6 tongue-and-groove using clamps to squeeze the four boards tightly together until you get the paired-up batten s bolted through on both sides of the door .

Locking Installation System Method of installing laminate floor ing with a unique profile that allows for easy installation of boards by just locking edges into place and requiring no glue.

- A custom wall unit with tongue-and-groove panelling defines the storage space and provides a place to keep clothing that’s only used occasionally.

The sheathing material may be square-edge, shiplap. boards, or plywood or oriented strand board (OSB). Sheathing. in addition to serving as a base for the finished siding material, stiffens the frame to resist sway caused by wind.

Today’s log home kits are made of milled solid timbers that use a variety of interlocking methods to eliminate air and water infiltration. In addition the joints are usually sealed with plastic caulking and gasket s.

Leave a Reply