Grout Cleaning Polishing Sealing Palm Desert Coachella Valley

Grout Cleaning Polishing Sealing Palm Desert Coachella Valley

Marble Floor

After the Marble Tile Cleaning, our services includes polishing and sealing of the floor.

Mexican Pavers

After the Mexican Paver Cleaning, our services includes low natural gloss or high gloss polishing and sealing of the floor.

Mexican Pavers

Our Process will provide maximum protection for your Mexican Pavers Flooring. After using the correct chemical products to strip, wipe clean, applying a penetrating-sealer and then a wet gloss sealer, your Mexican Pavers Flooring, will add beauty to your home.

Marble Tile

Marble is a natural stone in a class by itself, and for an air of sophistication and artistry, marble is the classic choice. Marble tiles and slabs are ornate and alluring with a naturally elegant appearance, and are suitable for a variety of effects. For an application such as a front hallway or foyer, marble tile flooring certainly sets an affluent and professional tone.

Nature Stone

Natural stone is a creation of nature. Like so many natural formations, every piece is unique and matchless. Within each piece of stone also lies the history of one particular place on our planet. Today’s limestone floor for instance, was once a mass of tiny sea creatures, then an ancient seabed, and after millions of years of uplift, a mountainside where the limestone was discovered in our day.

If Unsealed

Cleaning Products

Most popular general-purpose cleaners will etch or damage the stone or degrade the sealer, therefore removing protective properties and becoming susceptible to stains. Cleaning products containing too much acids or alkalines will etch the stone. Scouring powders and abrasives will scratch the surface.

Restoration of Tile, Stone, Concrete, Carpet Floors for Coachella, Palm Springs, Cathedral City, Rancho Mirage, Palm Desert, Indian Wells, La Quinta, Indio and for the rest of the Coachella Valley.

Brilliant Floors Restored is a professional stone cleaning and restoration company that specializes in services ranging from performing routine maintenance on stone floors and granite counter tops to solving complex tile, grout and stone problems. Our Partners combined have been in the floor restoration business for over forty years and with our knowledge we can help you to preserve and maintain your investment of lasting beauty in natural stone.

Examples on How to Select the Right Grout.

Selecting the right grout adds the finishing touch to the overall appearance of your tile installation. The color you choose can dramatically affect the look and feel of your tile, making the selection of grout just as important as picking the right tile.

Color Selection

After choosing your tile, the next step is to decide what effect you want. There are two schools of thought when it comes to choosing a grout color. One is TONE ON TONE, which means selecting a grout color that is a close match to the tile. The grout then acts as a background and creates a more uniform look. You can also choose a shade or tint slightly different from the tile color which will give your installation more depth and interest.

On the other hand, if you prefer to emphasize each tile, you would choose a grout that is a CONTRAST. The grout then acts as a frame for the tile, giving each one as individual look and the installation a grid effect.

You should also consider where the grout is going to be used. In a heavy-use area, a dark shade tends to show less dirt. And always remember to seal grout with proven excellent sealers for ease of maintenance.

You can use our color card to choose the color that bests fits your tile and the look you want to achieve. Simply place your tile next to the grout color and begin exploring the possibilities. Of course, with our range of colors, you might just consider picking your grout before you pick your tile.

Care and Maintenance

Now that you’ve found both the perfect tile and grout, be sure to protect your investment with our proven excellent products, a complete family designed to clean, protect, restore and beautify stone, tile, grout and masonry. You will have years of beauty ahead. Easily, Safely and Effectively.

Types of Grout:

There are four types of grout — sanded lime-based cementitious, lime-based cementitious unsanded, sanded epoxy-based and unsanded epoxy base. Unsanded grout is typically paired with softer stones such as marble and limestone. Sanded grout is usually used with harder surfaces. You cannot hone and polish if sanded grout has been used with soft stone. Epoxy grout does not need to be sealed because it will not absorb moisture. Epoxy grout is commonly used in restaurant chains.

Tile bathrooms are the #1 problem in commercial buildings. Toilet bowl cleaner is usually used — with little success.

Original grout color is very difficult to maintain with common tile cleaning products. Grout gets dirty and needs to be sealed.

Grout in countertops gets ugly and unhealthy and needs to be cleaned and sealed.

A heavy duty alkaline cleaner and degreaser, should be used to remove greasy soil from stone and tile floors, kitchen counters, bathroom shower stalls, and other natural stone and ceramic tile surfaces. For extremely stained grout, you can add an Energizer to the solution to bleach the grout while cleaning it.

Directions:

    Test in several inconspicuous area to determine the effectiveness and desired results. Especially test the integrity of the grout in several areas — some problems are hidden by soil — such as cracks, discolorations, bubbles in grout, dark spots, coatings etc. that don’t show up until after cleaning.

Make sure all surfaces to be cleaned are swept or vacuumed to remove loose debris.

Apply mixed solution with a clean mop, towel or sponge — or use the Hybrid Hard Surface Tile and Grout Tool or the Floor Tool attached to a high-pressure portable extractor, such as a Hard Surface Cleaning System.

Allow plenty of dwell time for the degreaser to work on the soil.

Agitate with a scrub brush or a floor machine equipped with a nylon grit as needed. NOTE: Nylon grit brushes are only for tiles that won’t scratch!

Remove using a sponge, wet/dry vacuum, extractor equipped with a hard surface tool, or damp mop.

Rinse area well with clean water.

To protect the areas from future soiling and staining, after complete rinsing and drying, apply impregnator sealer, per label instructions.

Grout Cleaning Polishing Sealing Palm Desert Coachella Valley

To restore grout haze and remove grout residue from porcelain and glass only, use an acid-based grout cleaner: Acid-based products will etch most polished marble and limestone surfaces! Apply mixed solution with a brush, sprayer, scrub brush, clean mop, towel or sponge. Agitate with a scrub brush or floor machine as needed. Remove using a sponge, wet/dry vacuum or damp mop. Rinse area well with clean water.

Basic Grout Usage

PRODUCT DESCRIPTION:

FLOOR GROUT is a sanded grout, composed of modified Portland Cement and finely graded aggregates. It is designed for use as a grouting material for any tiled surface with joints between 1/8″ and 1/2″. FLOOR GROUT is ideally suited for all glazed and unglazed ceramic and mosaic tile, quarry tile, brick pavers, slate, stone, marble and granite.

Frost proof

INSTALLATION:

Surface Preparation:

All surfaces must be clean and free of dust, dirt, oils, paints and all other contaminants that will prevent proper bond. Make certain no loose material remains in joint. For repair work, remove at least 1/16″ of old grout and scrub surface thoroughly with kitchen cleanser.

ANSI specifications recommend waiting 48 hours after initial tile setting before grouting to ensure maximum adhesion of tile to substrate. Remove tile spacers between tiles if they have been used. Dampen surface of tile making certain not to leave any standing water in the grout joints.

Mixing:

Mix FLOOR GROUT with clean water to the consistency of a smooth, trowelable putty, free from lumps. Allow the grout to stand for 15 minutes before using, then remix. Do not add additional water.

Mix only the amount of grout that can be used in 1 hour. When grouting highly moisture absorbent tiles (above 7% level).

Placement:

Using a hard rubber float, fill the joints of the tile working diagonally across the grout joints until they are packed full and are flush with the surface of the tile. As work progresses, turn the grout float perpendicular to the tile and use as a squeegee to remove as much excess grout from the tile surface as possible.

Allow the grout time to acquire its initial set before proceeding. Initial set has occurred when the grout joint can barely be indented when pressed hard with your fingernail. Using a towel or cheese cloth dampened with water, clean excess grout off the surface of the tile by rubbing in a circular motion dressing the joint as work progresses. Use as little water as possible.

Change water often to keep as clean as possible. Do not leave any water or grout residue on the surface of the grout joint. Remove any grout haze remaining after drying with a clean dry towel or cheese cloth.

Curing:

To provide a hard, dense grout joint, damp curing is recommended for the first 3 days after application. Damp cure by covering the installation with natural kraft paper.

After the grout has cured for 10 days, the installation may be cleaned to remove any remaining grout from the surface of the tile by scrubbing with hot water and soap. Acid cleaning is not recommended. After a minimum of 28 days curing, the installation may be sealed with a penetrating sealer.

Always allow a minimum of 24 hours before any sealer is applied on a «cleaned/washed» grout that has dried.


Leave a Reply