How To Clean Engineered Wood Floors

How To Clean Engineered Wood Floors

How To Clean Engineered Wood Floors?

Engineered Wood Floor

Engineered wood floors, laminate wood floors, snap-in wood floors, whatever name the manufacturer chooses to use, these floors have exploded in popularity. The boards are comprised of a type of press board, covered with a thin veneer of real wood. This two-ply construction allows the boards to breathe a bit, expanding and contracting with minimal exposure to humidity. They are easy to install, requiring few tools. The laminates come in a variety of woods, tones, and shapes. Once installed, they are a durable, beautiful, affordable addition to any home.

With proper cleaning and maintenance, engineered wood floors will last many years. Follow these easy steps to keep the floor looking and functioning well.

Clean spills as soon as they occur. Just like hardwood floors, engineered wood floors are not designed for prolonged exposure to moisture. Additionally, some liquids can stain the laminate floor if they are left in place too long as they can work their way in between the layers of particleboard and veneer. Once this occurs, it is necessary to replace the stained boards, rather than to try to clean the stain.

Area rugs are an excellent way to protect the high-traffic areas of the floor from hazards such as high heels and damaging scuffmarks. However, they can also trap fine dirt and dust onto the floor. Lift areas rugs and clean under them regularly. This dirt can scratch the floor every time someone steps on the area rug if it is not removed regularly. For floors that lead to an outside exit, consider placing mats, both inside and outside the door. This will help to remove excess dirt from shoes, prior to entering the house and stepping on the laminate floor.

Sweep Regularly

Use a soft bristled broom or a dust mop to sweep the floor two or three times per week. This activity will prevent larger dirt particles from begin ground into and scratching the surface of the floor. It will also remove finer dirt that can act as sandpaper to the floor’s finish if subjected to heavy foot traffic. If there are pets in the house, this is especially beneficial to keep the dust bunnies at bay.

Use a soft brush vacuum cleaner to vacuum the floor once a week. This activity will remove the finer particles of dirt and dust that can accumulate in the cracks and floor joints. If left unattended, dirt and dust could compromise the floor’s seal, causing the boards to shift or buckle.

Periodically, the floor will appear soiled even with regular sweeping and vacuuming. When the floor’s shine begins to dull use a damp mop and a small amount of cleaner. It will help to restore the floor to its original luster. The key to this deeper cleaning is that the mop must be damp, not soaking wet. The goal is to remove the thin layer of film, not to soak the wood thoroughly. The floor should be slightly damp while mopping and thoroughly dry within minutes.

Periodically, kids, pets, spouses, and other acts of God and Nature leave the floor heavily soiled. Use a straightforward cleaning solution consisting of one part white vinegar and three parts hot water, damp mop the floor. Be sure to wring the mop thoroughly before applying to the floor, as excessive moisture is the enemy of wood. The hot water will loosen the soil, and the white vinegar is an excellent cleansing agent. Because the solution is so diluted, the vinegar will not leave an odor. Because white vinegar is such a strong cleaner, the floor will dry to bright, streak free shine.

How to Clean Engineered Wood Floors

Engineered wood floors are gaining in popularity primarily because they are less expensive than natural hardwood floors, they are easy to maintain and they look beautiful for many years.

They are manufactured by adhering a layer of natural wood to an under layer of fiberboard. This design allows the floor to move with the temperature and humidity of the environment it is in, expanding and contracting as necessary. This means that most engineered wood floors can be installed in areas where one would not normally install a traditional hardwood floor. They will last a lifetime if cleaned and maintained properly.

Your biggest question then is probably going to be how to clean an engineered wood floors?

When considering how to clean an engineered wood floors there are only a few things that are required. The first is either a broom with soft bristles or a dust mop, a vacuum with a brush attachment and the cleaning solution recommended by the manufacturer.

These type of floors are not difficult to take care of once you know how to clean an engineered wood floors. The first thing you must remember is that they need to swept clean every two or three days. This is required in order to remove all the fine dirt that accumulate on a floor from people walking on it every day. These fine particles of dirt can scratch your floor if allowed to remain on it. It is also important to use a broom with soft bristles or a dust mop. You do not want to use anything on your floor that might scratch it.

The next thing you should remember when thinking about how to clean an engineered wood floors is to vacuum it with your vacuum cleaner’s brush attachment. This should be done about once each week. This will help pull up any dust or dirt that may have slipped between the boards.

The next step in how to clean an engineered wood floors is to use a mop that has been damped only slightly. You only need to do this if the floor is soiled heavily. Be sure to wring the mop out very well before using it on the floor. Alternatively, you can use some of the cleaning solution recommended by the manufacturer.

Always bear in mind that it is easier to keep a floor from getting dirty to begin with than it is to clean it. Placing area rugs or runners in areas that get a lot of traffic will help protect the floor. Be sure, though, to clean beneath them on a regular basisu so that dust and dirt does not accumulate beneath them. Place a mat outside the entryway to your home so that it will catch much of the dirt being tracked on people’s feet before it enters your home.

And last but not least, always clean up spills of any liquid immediately. Liquids can do enormous damage to any kind of wood floor if allowed to lay on its surface for an extended period of time.

Engineered wood floors are gaining in popularity primarily because they are less expensive than natural hardwood floors, they are easy to maintain and they look beautiful for many years.

They are manufactured by adhering a layer of natural wood to an under layer of fiberboard. This design allows the floor to move with the temperature and humidity of the environment it is in, expanding and contracting as necessary. This means that most engineered wood floors can be installed in areas where one would not normally install a traditional hardwood floor. They will last a lifetime if cleaned and maintained properly.

Your biggest question then is probably going to be how to clean an engineered wood floors.

When considering how to clean an engineered wood floors there are only a few things that are required. The first is either a broom with soft bristles or a dust mop, a vacuum with a brush attachment and the cleaning solution recommended by the manufacturer.

These type of floors are not difficult to take care of once you know how to clean an engineered wood floors. The first thing you must remember is that they need to swept clean every two or three days. This is required in order to remove all the fine dirt that accumulate on a floor from people walking on it every day. These fine particles of dirt can scratch your floor if allowed to remain on it. It is also important to use a broom with soft bristles or a dust mop. You do not want to use anything on your floor that might scratch it.

The next thing you should remember when thinking about how to clean an engineered wood floors is to vacuum it with your vacuum cleaner’s brush attachment. This should be done about once each week. This will help pull up any dust or dirt that may have slipped between the boards.

The next step in how to clean an engineered wood floors is to use a mop that has been damped only slightly. You only need to do this if the floor is soiled heavily. Be sure to wring the mop out very well before using it on the floor. Alternatively, you can use some of the cleaning solution recommended by the manufacturer.

Always bear in mind that it is easier to keep a floor from getting dirty to begin with than it is to clean it. Placing area rugs or runners in areas that get a lot of traffic will help protect the floor. Be sure, though, to clean beneath them on a regular basisu so that dust and dirt does not accumulate beneath them. Place a mat outside the entryway to your home so that it will catch much of the dirt being tracked on people’s feet before it enters your home.

And last but not least, always clean up spills of any liquid immediately. Liquids can do enormous damage to any kind of wood floor if allowed to lay on its surface for an extended period of time.


Leave a Reply