Flooring tips, how to install and care for flooring, carpeting and tile. Home improvement,

flooring tips, how to install and care for flooring, carpeting and tile. Home improvement,

All About Hardwood Floors — A Matter of Individuality

Construction and Installation Methods

Species Comparison

There are two basic types of hardwood flooring — solid and engineered. Engineered hardwood floors are made from layers (plies) of both hardwood and softwood. The top layer is typically a solid ply of the species. Solid hardwood flooring is not made up of any plies. It is the pure solid hardwood species and typically costs more.

Wood Floor Maintenance Care Guide

The key to lasting beauty of your wood flooring investment is proper maintenance for the life of your floor. Included in this page are care guide lines, maintaining urethanes finishes, wax finishes, and the Do’s & Don’ts of your wood floor product.

The following are some excellent guidelines for maintaining today’s wood floors.

  • All Hardwood Floors regardless of how the floor has been finished, there are certain steps that must be taken to maintain the beauty of the hardwood floor.
  • Every floor must be dust mopped, vacuumed or swept with a soft bristle broom daily, or as often as necessary, to remove grit and dust from the surface. Walking on dusty or dirty floor is the fastest way to damage a finish.
  • Place walk-off mats at all exterior entrances. This will capture much of the harmful dirt before it even reaches the hardwood floor. Shake out, wash or vacuum mats and area rugs frequently.
  • Floor protector pads of soft felt or similar material should be placed on the bottoms of the legs of the furniture. Floor protectors must be kept clean of grit and periodically replaced.
  • Keep high heels in good repairs. An unprotected tip will dent any hardwood floor.
  • Kitchen floors experience the most traffic in a home. To prevent premature wear of the floor, place an area rug in front of the sink and stove area. Shake out or vacuum the rugs frequently.
  • Finally, using a humidifier or dehumidifier in conjunction with a furnace or air conditioning system to maintain relative humidity in the home at 30-50% will maintain the moisture in the wood and minimize cracks between the boards.

      Urethane Finishes Routine Cleaning — Use the finish manufacturer’s or the pre-finished floor manufacturer’s recommended cleaning system. If the manufacturer is not known or has no recommendation, use a cleaner that will not leave a residue that would inhibit bonding and recoating. NEVER wax a urethane finish. Do not generally wet a wood floor with water. When using any wood floor cleaner which requires mixing with water, follow mixing directions precisely. A cloth wetted with water and squeezed dry may be used to wipe up food stuffs and other spills, provided the area is buffed dry immediately. Heel or scuff marks and stubborn stains may be removed by lightly rubbing with a cloth and a wood floor cleaner.

  • Long-term Maintenance — Urethane finishes eventually will show wear patterns from surface scratching. When high traffic area begin to look dull it is time to recoat or restore the finish. Always follow the manufacturer’s recommendations.
  • Wax Finishes

    Routine Cleaning — Use the finish manufacturer’s or the pre-finished floor manufacturer’s recommended cleaning system. Never use a water based cleaner on a wax floor. Once dirt and dust have been removed, the luster may be restored by buffing. Apply additional wax only in heavy traffic areas, if needed. Caution, do not over wax. An application of a solvent based cleaning product will remove dirt and allow the floor to be buffed clean. Spills must be wiped up immediately with a lightly water dampened cloth and then hand buffed dry.

    To remove white spots caused by water spills, use fine steel wool (#000) and a small amount of mineral spirits, rub gently in a circular motion until spot is gone. Then apply additional wax to the area and buff.Long-term Maintenance — Wax floors that have been neglected may be restored by deep cleaning. An application of a renovating system with fine steel wool, proper dry times and a complete re-waxing will clean and reseal the wood as well as restore color and luster.Note: Once wax, in any form, has been applied to a wood floor, only wax may be used as a coating over the floor. Urethane and other surface finished cannot be applied over an existing wax finish.

    All About Hardwood Floors — A Matter of Individuality

    Construction and Installation Methods

    flooring tips, how to install and care for flooring, carpeting and tile. Home improvement,

    Species Comparison

    There are two basic types of hardwood flooring — solid and engineered. Engineered hardwood floors are made from layers (plies) of both hardwood and softwood. The top layer is typically a solid ply of the species. Solid hardwood flooring is not made up of any plies. It is the pure solid hardwood species and typically costs more.

    Wood Floor Maintenance Care Guide

    The key to lasting beauty of your wood flooring investment is proper maintenance for the life of your floor. Included in this page are care guide lines, maintaining urethanes finishes, wax finishes, and the Do’s & Don’ts of your wood floor product.

    The following are some excellent guidelines for maintaining today’s wood floors.

    • All Hardwood Floors regardless of how the floor has been finished, there are certain steps that must be taken to maintain the beauty of the hardwood floor.
    • Every floor must be dust mopped, vacuumed or swept with a soft bristle broom daily, or as often as necessary, to remove grit and dust from the surface. Walking on dusty or dirty floor is the fastest way to damage a finish.
    • Place walk-off mats at all exterior entrances. This will capture much of the harmful dirt before it even reaches the hardwood floor. Shake out, wash or vacuum mats and area rugs frequently.
  • Floor protector pads of soft felt or similar material should be placed on the bottoms of the legs of the furniture. Floor protectors must be kept clean of grit and periodically replaced.
  • Keep high heels in good repairs. An unprotected tip will dent any hardwood floor.
  • Kitchen floors experience the most traffic in a home. To prevent premature wear of the floor, place an area rug in front of the sink and stove area. Shake out or vacuum the rugs frequently.
  • Finally, using a humidifier or dehumidifier in conjunction with a furnace or air conditioning system to maintain relative humidity in the home at 30-50% will maintain the moisture in the wood and minimize cracks between the boards.

      Urethane Finishes Routine Cleaning — Use the finish manufacturer’s or the pre-finished floor manufacturer’s recommended cleaning system. If the manufacturer is not known or has no recommendation, use a cleaner that will not leave a residue that would inhibit bonding and recoating. NEVER wax a urethane finish. Do not generally wet a wood floor with water. When using any wood floor cleaner which requires mixing with water, follow mixing directions precisely. A cloth wetted with water and squeezed dry may be used to wipe up food stuffs and other spills, provided the area is buffed dry immediately. Heel or scuff marks and stubborn stains may be removed by lightly rubbing with a cloth and a wood floor cleaner.

  • Long-term Maintenance — Urethane finishes eventually will show wear patterns from surface scratching. When high traffic area begin to look dull it is time to recoat or restore the finish. Always follow the manufacturer’s recommendations.
  • Wax Finishes

    Routine Cleaning — Use the finish manufacturer’s or the pre-finished floor manufacturer’s recommended cleaning system. Never use a water based cleaner on a wax floor. Once dirt and dust have been removed, the luster may be restored by buffing. Apply additional wax only in heavy traffic areas, if needed. Caution, do not over wax. An application of a solvent based cleaning product will remove dirt and allow the floor to be buffed clean. Spills must be wiped up immediately with a lightly water dampened cloth and then hand buffed dry.

    To remove white spots caused by water spills, use fine steel wool (#000) and a small amount of mineral spirits, rub gently in a circular motion until spot is gone. Then apply additional wax to the area and buff.Long-term Maintenance — Wax floors that have been neglected may be restored by deep cleaning. An application of a renovating system with fine steel wool, proper dry times and a complete re-waxing will clean and reseal the wood as well as restore color and luster.Note: Once wax, in any form, has been applied to a wood floor, only wax may be used as a coating over the floor. Urethane and other surface finished cannot be applied over an existing wax finish.


    Leave a Reply