A Top Rated DIY Garage Floor Sealer that Deserves Attention All Garage Floors

Our Pick for an Excellent DIY Acrylic Garage Floor Sealer

HD6525-MMA garage floor sealer

It can become confusing when looking for an easy to use DIY garage floor sealer that offers good protection and looks great as well.  While some sealers offer a very durable and beautiful finish, such as epoxy. the do it yourself part turns out to be much more involved than the average homeowner wants to tackle.

Every once in a while, we at All Garage Floors like to highlight a product that we feel does a particular job well and/or is easy to use.  In this particular case, if you want a garage floor sealer that is both easy to apply and offers a nice durable finish to bare concrete, we recommend that you take a look at the HD6525-MMA™ Interior/Exterior Concrete Sealer by Legacy Industrial*.

Why this particular DIY garage floor sealer?

What makes this concrete sealer unique to most other easy to use topical acrylic sealers is the use of methyl methacrylate copolymer acrylic resin (MMA). It’s a solvent based sealer that provides the MMA in a 25% solids formulation.  Here is a quote from Legacy Industrial’s technical data sheet about the benefits of an MMA sealer;

HD6525-MMA™ offers improved resistance to rain, the sun, freezing temperatures, stains, hot-tires, and other pollutants that sometimes can be hazardous to concrete, far greater than other conventional sealers. HD6525-MMA™ truly is non-yellowing and will not have hot-tire issues, ever!

What this means is that you get a DIY garage floor sealer that can be easily applied with a roller or pump-up garden sprayer and delivers better protection than typical acrylic concrete sealers .  It is approved for both interior and exterior use which means that you don’t have to worry about your garage floor being exposed to the sun for long periods of time.

It offers better protection over standard water based acrylic sealer and can be tinted to provide for many opaque colored finishes as well.  MMA creates a much better film formation that contributes to the following benefits when applied in multiple coats:

  • Water resistance
  • Good adhesion
  • Concrete dust proof
  • Excellent efflorescence and alkali resistance
  • Non yellowing
  • Chemical resistance
  • No hot-tire pick up
  • Excellent over bare or stained/dyed concrete
  • Higher abrasion resistance
  • Fast dry time
  • A Top Rated DIY Garage Floor Sealer that Deserves Attention All Garage Floors
  • Easy to clean
  • Tintable to many colors
  • Available in a clear matte or gloss finish
  • The better chemical and abrasion resistance is one benefit that makes this garage floor sealer stand out compared to other acrylic sealers.  It has good resistance to motor oil and salts and good resistance to gasoline and most other chemicals that you find in a typical garage.  If you do happen to damage the surface, it is easily repaired with the application of more sealer.

    Is this type of sealer just as durable as epoxy? No, it is not and is one of the reasons why it is much less expensive. But it is also much easier to apply than epoxy and provides for good protection and looks to the average garage floor that doesn’t see a lot of abuse. MMA sealers are also a popular choice for commercial applications as well.

    One thing to be aware of is that like most topical sealers, this one can be somewhat slippery when wet. Legacy Industrial recommends applying their Soft Skid additive in the Fine grit level to the final coat if you want to improve the anti-skid properties.

    How easy is it to apply this sealer?

    Just like any other topical do it yourself acrylic concrete sealer, HD6525 can be applied with a roller or garden type pump-up sprayer.  If you can paint a wall and clean a garage floor, then you are qualified to apply this sealer.

    Because it is solvent based, you need to take the proper precautions and extinguish any open flames that you may have in the garage.  You do need to clean the concrete before application making sure to remove all contaminants such as oil, dirt, dust, grease and laitance.  Be sure to give the concrete adequate drying time before application and do not apply it if there are any visible signs of moisture. A light sanding or acid etch may be required if your concrete is not very porous.

    A minimum of two thin coats are recommended, with the application of a third coat for the best appearance and performance.  You can apply each coat about 4 hours after the first coat and you can walk on it about 4-6 hours after application.   It can be driven on 24-48 hours after the final coat.  One gallon covers approximately 250-350 square feet.   Remember that the second and third coats always go further since they don’t soak into the concrete like the first.

    Cost as of the time of this article is $79 a gallon for the matte finish and it can be purchased for even less if bought in a 5 gallon container.

    If you are looking for a DIY garage floor sealer that will stand up to the rigors of light to medium duty garage use, then this sealer is definitely worth looking into.  It is easy to apply, easily repaired, easy to clean, looks great, and has good wear resistance for a sealer of this type.  For more information on this product we recommend that you contact Legacy Industrial directly.

    * All Garage Floors does not represent nor benefit from the sale of this product .

    Leave a Reply