Industrial Floor Coating Industrial Floor Coatings Epoxy Floor Coating

Industrial Floor Coating Industrial Floor Coatings Epoxy Floor Coating

Industrial Floor Coatings & Commercial Floor Coatings

Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Ideal for a wide variety of concrete and metal surfaces, these high-performance industrial and commercial epoxy floor coatings can be applied to damp surfaces and are resistant to gasoline, sewage, alkalis, and other corrosive substances. Several of our Eco-Floor products are FDA-approved for food-handling areas.

Example applications:

  • Service bays, garage floors, automotive show rooms, and airplane hangars
  • Supermarkets, food service areas, food processing plants
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Review the products below, then contact us to request data sheets and specs. Call us at (888) 432-6807 for expert advice to select the product that best meets your needs.

Eco-Polymer SP-2000R (liquid and paste)

We designed this 100% solids, no VOCs polymer coating to be a more economical and higher-performing alternative to coal-tar epoxies. This hybrid Novolac anti corrosion coating offers outstanding chemical resistance and excellent adhesion (in excess of 3000 psi). Offers excellent resistance against salt and brackish water, sewage, diluted mineral acids, salts, and alkalis. Ideal for water/waste management including water tanks, wet stations, wet wells, pipes (including concrete and ductile), manholes, lift stations, cooling towers, and basins. Also great for interior and exterior pipe linings or coatings. Available with KevlarR reinforcement and ceramic fill for wear resistance. Excellent adhesion under less-than-ideal conditions such as wet, corroded surfaces. The rubber additive provides good impact resistance and bridges micro-cracks. Adhesion characteristics allow it to bond to steel, concrete, and iron. Available as a liquid or paste (paste grade may be applied underwater). (Eco-Polymer Concrete Primer/Sealer SC-1100 is recommended on concrete surfaces.)

Mfg. distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Industrial Floor Coating Industrial Floor Coatings Epoxy Floor Coating

Eco-Polymer SC-3300 (liquid and paste)

Offering a high cross-link density and ceramic-filled Novolac coating, Eco-Polymer SC-3300 provides superior, long-term chemical resistance in immersion service. The solids content and morphology make this industrial-strength polymer an excellent tank liner. This 100% solids sprayable industrial maintenance coating is ideal for concrete and metal surfaces such as pipe and tank coatings, secondary containment areas, and other areas where high chemical resistance is a must. Stands up to 98% sulphuric acid. Available as a liquid or paste. Dry service temperatures to 300 degrees F.

Mfg. distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer SC-5400 (liquid and paste)

A higher temperature version of SC-3300, this “industrial strength” epoxy coating offers superior chemical resistance as well as wear and abrasion resistance. Applications include ducts (including FGD), wet scrubbers, secondary containment, steel/concrete tanks, process vessels, and other concrete and metal surfaces requiring an anti corrosion coating to withstand elevated temperatures and severe chemical service. Dry service temperatures as high as 450 degrees F. Available as a paste or liquid.

Mfg. distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer EC-306

This synthetic rebuild and repair material for metal parts and surfaces is machinable. It has a smooth spreadable consistency, which makes it easy to apply. Eco-Polymer EC-306 is most often used in steel tank repair but is also well suited to rebuilding a variety of damaged metal surfaces such as tube sheets, shafts, and bearing housings.

Mfg. distributed and sold exclusively by Construction Systems Supply.

Good for: Industrial Equipment Coating and Repair Epoxies

Eco-Polymer EC-310

This rugged, ceramic-filled repair-and-wear compound is specially formulated for metal surfaces in severe environments. Eco-Polymer EC-310 offers superior abrasion resistance and tolerates less-than-optimal conditions. The EC-310 product line offers several varieties including fast set, cure in very low temperatures, cure in very high temperatures, added impact resistance. and lower coefficient of friction.

Good for: Industrial Equipment Coating and Repair Epoxies


Leave a Reply