HydraMaster Products Chemicals Booster HydraBoost CT

HydraMaster Products Chemicals Booster HydraBoost CT

HydraBoost CT

Powder High Powered Concrete and Tile Cleaner and Degreaser/ Booster Additive

HydraBoost CT is a powder, high powered concrete and tile and grout cleaner and degreaser designed to safely and effectively dissolve, break down, dislodge, and emulsify even the grimiest soils from concrete, finished concrete, and ceramic, porcelain, and quarry tile floors and surfaces. HydraBoost CT is an economical cleaner and degreaser designed to penetrate porous surfaces and dissolve the toughest build-up of oil and grease. Alkaline cleaning agents and heavy duty surfactants are activated by the power of oxygen to allow the effervescent solution to get into every crack, crevice, and pore. It is the ideal cleaning agent for heavily soiled restaurant kitchen tile floors and other indoor and outdoor surfaces exposed to high levels of grease and oil contamination. It does so without the use of harsh chlorinated solvents or mineral spirits, leaving the surface squeaky clean and residue free. HydraBoost CT is specifically designed to work in conjunction with high powered hard surface cleaning wands such as the RX-20 with hard floor attachments, and rotary or stationary hard surface cleaning extraction wands. Its powerful formula though, will work with virtually any brush agitation system, automatic floor scrubber, or even a mop and bucket cleaning system. HydraBoost CT is designed to be used as a preconditioning agent and applied to the surface being cleaned first. The oxygenated cleaning power of HydraBoost CT also makes it an ideal boosting agent for trashed and neglected carpet that has been exposed to high levels of oxygenated oils and grease. Simply add a couple of ounces of HydraBoost CT to your favorite traffic lane cleaner/preconditioner for the ultimate in cleaning power.

  • HydraBoost CT is a powder, high powered concrete and tile and grout cleaner and degreaser designed to safely and effectively dissolve, break down, dislodge, and emulsify even the grimiest soils from concrete, finished concrete, and ceramic, porcelain, and quarry tile floors and surfaces.
  • Alkaline cleaning agents and heavy duty surfactants are activated by the power of oxygen to allow the effervescent solution to get into every crack, crevice, and pore. It is the ideal cleaning agent for heavily soiled restaurant kitchen tile floors and other indoor and outdoor surfaces exposed to high levels of grease and oil contamination.
  • HydraBoost CT is specifically designed to work in conjunction with high powered hard surface cleaning wands such as the RX-20 with hard floor attachments, and rotary or stationary hard surface cleaning extraction wands. Its powerful formula though, will work with virtually any brush agitation system, automatic floor scrubber, or even a mop and bucket cleaning system. The oxygenated cleaning power of HydraBoost CT also makes it an ideal boosting agent for trashed and neglected carpet that has been exposed to high levels of oxygenated oils and grease. Simply add a couple of ounces of HydraBoost CT to your favorite traffic lane cleaner/preconditioner for the ultimate in cleaning power
  • Available Sizes: 6.5 # Jar

1. Read entire label before using. Use only as directed. Always pretest surface with cleaning solution for color­fastness prior to cleaning. Ensure work area is well-ventilated during application. Keep children and pets out of the area during application and drying. HydraBoost CT is not recommended for cleaning natural stone floors.

HydraMaster Products Chemicals Booster HydraBoost CT

2. This product is ultra-concentrated. For normal soiling, mix 2 ounces of HydraBoost CT powder with one gallon of warm or hot water into a professional sprayer. For extreme soiling, mix three to four ounces of powder with a gallon of warm of hot water into a professional sprayer. For application through a Inline Injection Sprayer, mix 12 oz. of powder and fill container with water. Use 4:1 dilution.

3. Apply mixed solution with sprayer evenly and liberally across surface to be cleaned. You can use a pump-up sprayer or a battery powered sprayer. If preferred, you can apply mixed solution with a damp mop, sponge, or other appropriate professional equipment. If using a mop for solution application and surface cleaning, change your mop water often to make sure that soil is not re-deposited.

4. Allow for 5 -10 minutes of dwell time. For concrete, if stains have been deeply absorbed, allow 15 minutes of dwell time so the solution has time to reach into the concrete pores and crevices and the oxygen activated effervescent solution can dissolve the soiling and lighten discoloration.

5. For best results, agitate and extract cleaning solution using warm or hot water and a rotary agitation hard surface cleaner such as a the RX-20 with hard floor attachments, or rotary or stationary hard surface cleaning extraction wands For tight spaces or especially sensitive surfaces, use a hard surface cleaning wand, or simply mop to rinse with clean warm or hot water.

6. When area has been rinsed thoroughly. Allow floor to dry.

7. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.

For use as a carpet cleaning solution booster/additive

1. Mix two ounces of HydraBoost CT with each gallon of mixed prespray (traffic lane cleaner, preconditioner) solution. This mixture is not recommended for wool carpeting or residential nylon carpets that are being properly maintained.

2. Always pretest surface with boosted cleaning solution for color­fastness prior to cleaning.

3. Proceed to apply the prespray and continue cleaning in accordance with the directions of the prespray.

Leave a Reply