Gym Flooring Rubber Jigsaw Gym Tile — Edge

Gym Flooring  Rubber Jigsaw Gym Tile - Edge

RUBBER JIGSAW TILE CARE

SMAI Rubber Jigsaw tiles can be easily cleaned using a vacuum cleaner and finished with a damp mop using a PH Neutral detergent solution. If the tiles move for some reason and gaps develop between the tiles it is recommended that the gap be filled with black silicone/Gap filler available from leading hardware stores.

Please ensure that appropriate PPE (Personal Protective Equipment) is used in order to reduce the risk of injuries related to installation of the flooring.

RUBBER JIGSAW TILE WARRANTY

SMAI Rubber Jigsaw tiles are an impact absorbing option, constructed of recycled rubber from car tyres and a mixture of EPDM fleck for an attractive colourful finish. The tiles are bound with a Non Toxic MDI (Polyurethane) binder for your safety and tested and approved to ASISO9239.1-2003 Part 1 to meet the BCA (Building code of Australia) requirements.

SMAI Rubber Jigsaw tiles are suitable for areas with heavy weight impact and high traffic such as Gyms, PT studios, CrossFit Boxes and any area indoor or outdoor requiring a protective, durable, non-slip commercial flooring solution for weight training.

SMAI Rubber Jigsaw tiles have a warranty for any manufacturing faults for up to 12 months from the date of purchase, anything after this time would be considered normal wear and tear issue. If for some reason during the warranted period your gym tiles deteriorate abnormally, images of the proposed damage are required to be supplied for inspection. With these images SMAI will determine whether the damage is the cause of a manufacturing fault or misuse. In the event the product damage is deemed to be caused by a manufacturing fault, a replacement of the damaged item will be supplied (shipping expenses will be at the cost of the customer). Damage caused by misuse will not be warranted, misuse would be anything considered (and not limited to) the following:

  • Burns, cuts, accident, vandalism, abuse, negligence, sweat
  • Damage caused by incorrect installation
  • Use of incorrect chemicals, herbicides or pesticides
  • Gym Flooring  Rubber Jigsaw Gym Tile - Edge
  • Use of incorrect cleaning methods
  • Use of in-fill products of an incorrect grade or level
  • Normal wear and tear (including Loss of elasticity at the joins from lifting and interchanging over time)
  • Abrasions due to use of inappropriate footwear or sports equipment

(Note: High traffic areas are more susceptible to wear and tear and therefore need more attention when it comes to maintenance)

RUBBER JIGSAW TILE INSTALLATION

1. SMAI Rubber Jigsaw tiles are suitable to be laid manually by any person without expert knowledge as they can simply be laid out tightly over the floor surface area and the weight of the tile itself will hold them in position. For a professional finish please follow the steps below:

2. Make sure that your laying surface is flat, level and clean prior to starting

3. Choose a large straight wall to begin: it is recommended that you choose the largest wall side of the area as this will make the job significantly easier and faster.

4. Continue to tile row after row

5. Continue laying until you reach the extreme side of the room, lay the final mat into position and mark the length/width for cutting using a sharp Stanley knife or reciprocating saw.

6. Edge mats such as those in front of a roller door must be stuck down permanently with adhesive or double sided tape as they may move and cause tripping hazards. If you finish the mats on an area other than a wall it is also recommended that the last row be affixed using double sided tape.

7. If you are concerned about the overall finish of the floor and you are not confident in your installation skills there are many Builders or flooring contractors that can be consulted for installation purposes.


Leave a Reply