Proper Floor Joist Installation on a Concrete Slab eHow

Proper Floor Joist Installation on a Concrete Slab eHow

Other People Are Reading


When installing floor joists on top of a concrete slab, protect the wood from the corrosiveness of the concrete. At each floor joist and around the rim of the floor, install felt paper between the concrete and the wood frame of the floor system. Marks all areas where wood will touch the concrete, and glue 2-inch-wide strips of felt paper to the concrete. Use basic school glue sticks — contact cement — to hold the paper down. Avoid using construction adhesive or any other glue that may cause lumps in the paper after it has dried.

Treated wood should be laid flat onto the concrete slab at the point where the floor joists will meet the concrete. Lay the treated 2-by-4s onto the concrete and attach them using concrete nails or screws. The nails should be shot through the 2-by-4s and into the concrete using a concrete nail gun. Rent these tools at your local tool rental store. When using concrete screws to attach the 2-by-4s to the concrete, drill holes through the wood and into the concrete using a hammer drill and concrete bit. Use the appropriate size screws — corresponding to the drill bit size — to attach the wood. Countersink the screws by drilling a hole into the wood that is 1/2 inch deep and slightly larger than the head of the concrete screw.

More Like This

You May Also Like

Building a framed wood floor over an existing concrete slab can provide the space needed for electric wiring, heat venting, plumbing drain.

Floor joists are structural members used to support floors in the majority of homes built today. For homes built with concrete block.

Wood floors create a warmth and beauty when installed in a home. However, installing them over a concrete slab can pose some.

Concrete floors are durable, relatively inexpensive and utilitarian. When properly prepared and installed, concrete floors will stand the test of time. They.

A nice, solid floor is a must in any home and installing floor joists is something you can do yourself.

Garage conversions are an economical way to add a room to a home because the space is already enclosed. One area in.

When installing a hardwood floor, you’ll nail the wood floor planks into the floor joists for support. After you strip off the.

There are several ways to build a new shed on your property. Building a platform floor on top of concrete piers is.

Building a Pergola on a Concrete Slab is simple. There are two moderately easy methods, and this article will cover both.

Proper Floor Joist Installation on a Concrete Slab eHow

If you’re building a house or adding on a room, you must lay out floor joists once the basement walls are up.

Metal floor joists are common in manufactured homes. Adding a sub-floor to your metal joists will provide a solid base for the.

Your basement becomes a cold room during winter, and the basement floor is no exception. Make it a little warmer by installing.

Sometimes the design of a home’s floor structure calls for attaching floor joists to a concrete block wall. The most common means.

Many types of flooring can be installed over a concrete sub floor. However, many homeowners are disappointed to discover that solid wood.

The first step before laying concrete is to decide what type of concrete you are going to use. If you have a.

Whether you’re finishing a basement or a garage to make more space in your home, you’ll need to install a wooden subfloor.

Putting down wood floors can add to the value of a home. Wood flooring is popular, fairly low maintenance and can be.

Leave a Reply