Installing Tiles on a Concrete Basement Floor

Installing Tiles on a Concrete Basement Floor

Installing Tiles on a Concrete Basement Floor

Concrete floors look dull and boring, but are often seen in interior as well as exterior areas of homes and commercial spaces. Basements are the most common areas where you can find concrete flooring. While you plan to remodel this basement and convert it into a usable space, installing a nice flooring is quite essential. Installing tiles on a concrete basement floor is one of the popular solutions. Ceramics and vinyl tiles are the common picks for this purpose. Well, if you are wondering how to install the tiles, then here are the tips to help you rightly perform this task.

Steps to Consider and Follow

Cleaning the Floor

Cleaning the existing concrete surface thoroughly using a commercial cleaner is the first essential step. You can use a brush and water hose, along with a good commercial floor cleaner to work on this task. Mud, debris, accumulated dirt, etc. needs to be cleared off well so as to have a clean surface for working on the project.

Concrete Repair and Leveling

Once the concrete is clean, you can mark the areas to be repaired. This includes leveling uneven areas, filling up small and large holes and leveling the raised surfaces and sealing the minor and major cracks as well. Sand the floor with high grit sandpaper to get rid of raised surfaces. Use a floor leveling compound to level the surface by filling the cracks and holes. Once the process of repairing is over, let the surface dry well. Now, again wash off the floor to have a clean and plain surface.

Plan Layout and Dry Set the Tiles

Now that the surface is ready, it is time to set the tiles. Well, before you start laying the tiles, it is important that you plan the layout well. Depending upon the shape, size and design of chosen tiles, you can opt for creative layouts that can give a completely different look to the surface. Once the layout is finalized, you can dry set the tiles and checkout if the same is working well. Set the tiles and go on marking the area with chalk lines.

Apply the Thinset Mortar

You will have to use thinset which is basically a mortar based adhesive that helps set the tiles on concrete floor. There are various types of thinset mortars available in the market and you can choose one of the most suitable type. This is usually mixed in water or in an acrylic adhesive. The same can be decided after reading the manufacturer’s instructions. Apply the mixed thinset using a grooved trowel.

Installing Tiles on a Concrete Basement Floor

Lay the Tiles

It is time to lay the tiles on applied mortar. Place the tiles according to the decided layout and gently tap them in place. Make sure that the line spacing between tiles is perfect. Use spacers for the same so as to achieve perfection. Let the mortar dry and allow the tiles to set well in place. Leave the surface undisturbed for at least a day.

Finish with Grout

Once the tiles are set well, you need to grout them. Grout is available in various colors and you can pick one depending upon the background color and design color of installed tiles. Mix it as mentioned on the package and apply it using a float. Keep cleaning the excess amount of grout over the gaps and that which is spread on surface of the tiles as you apply it.

Let the flooring dry for a day or two. You can wash off the floors or clean them with damp mop so as to make them ready for use. Appearance of this flooring can be further spiced up using fancy rugs and carpets. All the best!


Leave a Reply