Navigating the Flooring Thicket Find the Greenest Way to Meet Your Needs — Green Home Guide by USGBC

Navigating the Flooring Thicket Find the Greenest Way to Meet Your Needs - Green Home Guide by USGBC

Navigating the Flooring Thicket: Find the Greenest Way to Meet Your Needs

Paul Kretkowski wrote this article, with contributions from consultants Marian Keeler and Kirsten Ritchie, and architect Andrew Mangan.

Your choice of flooring material will affect everyone in your home for decades and have substantial impacts on the environment at large.

Floors usually account for more surface area than anything else in a house except the walls, so they have an outsized effect on indoor air quality. Adults, children and pets will walk on them, play on them, sit on them, wear them down and breathe anything they emit for many years.

Since flooring may take up thousands of square feet, large quantities of raw materials, glues, finishes, adhesives and cleanerswith all their associated environmental impacts and energy requirementsare required to make, move, install and maintain it. But you can select flooring materials that will help you maximize the quality of your indoor environment while minimizing damage to the natural environment.

Quick links to materials reviewed in this article

Think twice (or three times) about vinyl

Some flooring types are clearly at odds with these goals. Polyvinyl chloride (PVC) flooring is a prime example. Because its relatively inexpensive and easy to install, its one of the most popular flooring choices14 billion pounds of it are produced each year in North America. But from a health and environmental sustainability standpoint it couldnt be much worse, according to Marian Keeler. green building consultant and author of Fundamentals of Integrated Design for Sustainable Building (Wiley).

Vinyl presents a health hazard across its entire lifecycle, from production to installation to use and disposal, Keeler says, noting studies that show a correlation between the plasticizers found in vinyl and childhood asthma.

Vinyl is the poster child for many things you should avoid if you want to create a safe, green home:

  • Vinyl manufacturing creates poisons including dioxin, vinyl chloride and ethylene dichloride. which can affect the environment in surrounding areas.
  • Vinyl is a plastic based on nonrenewable petroleum, and the oil needed to make it usually travels thousands of miles to get to North America. This makes vinyl wasteful of raw materials and sharply raises its embodied energy cost.
  • Once installed, vinyl may off-gas potentially harmful compounds (including lead, cadmium and phthalate plasticizers ) for years.
  • Once vinyls useful life ends, it will not decay in landfills. Millions of pounds of vinyl tile are landfilled in the United States each year; otherwise, vinyl must be burned at very high temperatures to avoid releasing poisonous dioxins. (The industrys Vinyl Institute has claimed it is making progress in recycling, however.)

Consider key factors: function, health resource use

Most flooring choices are less clear-cut than vinylbut vinyls problems are emblematic of the trade-offs buyers must make when deciding on flooring. For example:

  • Stone is elegant and durable but is nonrenewable, and it requires large amounts of energy to quarry, finish, transport and install.
  • Bamboo is rapidly renewable but transporting it from Asia raises its embodied energy, and the glues and binders in some bamboo flooring contain potentially harmful aldehydes .
  • Carpet is soft, warm and has excellent sound-absorbing properties, but it is relatively short-lived and attracts dirt, dust, pesticides, dander and more. In addition, nearly 5 billion pounds of it winds up in landfills each year.

Issues such as safety, renewability, embodied energy, durability, off-gassing and recyclability come up repeatedly when considering flooring, and there is no correct answer. The right option depends on your needs and tastes, and your desire for a house thats safe for you and the environment.

A good place to start is with what builders call programming: the narrowing down of choices based on your needs. Consider:

  • Desired flooring type (soft or hard)
  • Room function
  • Occupants (kids; people with allergies, asthma or chemical sensitivities)
  • Cleaning and maintenance concerns
  • Aesthetic requirements (color, pattern, texture)
  • Acoustic requirements (babys nursery, older persons room, entertainment room)
  • Any other important requirements.

Once youve decided what you need from your flooring, consider the trade-offs of materials that meet your needs. Following are the major factors in determining a flooring materials environmental and health impacts.

Raw Materials

Ideally, flooring materials originate with a renewable substance: for example, bamboo, wood and cork originate from plants. While ceramic tile and stone are plentiful, they are not renewable, notes Andrew Mangan, an architect and builder in Los Angeles.

The whole idea is to use and reuse and recycle, and use products that can be reharvested quickly, he says. Obviously stone can never be reharvestedover millions of years, maybe. Id be happy if I didnt use any natural stone, or any hardwood that wasnt sustainable.

How renewable materials like wood or bamboo are harvested is crucial. Both can be cultivated or harvested in environmentally destructive ways, so its important to select sustainably harvested products. Look for wood and bamboo products certified by the Forest Stewardship Council (FSC).

Also consider products salvaged from existing structures (including wood, stone, and tile) and recycled or partially recycled materials (including rubber flooring made from used automobile tires). These have substantial mechanical energy costs but require little additional input of virgin resources.


In general, the less a material must be modified during manufacture, the better. Stone, wood and bamboo require the least modification; cork, ceramic tile, linoleum, rubber flooring, and carpets and rugs require more energy (and potentially, chemical processing) to manufacture.


Some flooring materials (such as Asian bamboo or European linoleum) must be shipped great distances, increasing their embodied energy cost and total environmental impact. The U.S. Green Building Councils LEED (Leadership in Energy and Environmental Design) program recommends using materials that originate within 500 miles of your home to help keep embodied energy costs low.

Ultimately, we want to reduce embodied energy in terms of transportation costs and in terms of emissions, Keeler says, so local is always better. She notes, however, that embodied energy is a complex issue involving both weight and the transportation mode (sea, rail, truck, etc.).


Installation can require cutting, sanding, sealing, and adhesive application to attach the flooring to the substrate in your house. Its important to know how much these installation activities may affect indoor air quality. Water-based adhesives are generally better than solvent-based options. Green Seals adhesives standard sets 150 grams of volatile organic compounds (VOCs) per liter of product as a safe maximum.

Use and Maintenance

Once installed, most flooring materials will off-gas compoundssome of them inert, some potentially harmfulover long periods of time, according to Kirsten Ritchie, director of environmental claims certification at Scientific Certification Systems. an environmental testing firm in Emeryville, California.

One way to tell whether a flooring product is safe to have around for the long term is to look for the FloorScore seal, which Ritchies firm developed in conjunction with the Resilient Floor Covering Institute (RFCI). It certifies certain products as meeting Californias tough section 01350 requirements for indoor emissions. (See a list of certified products here .)

Here are some other well regarded emissions standards to look for when shopping. In Germany, the E1 standard mandates a maximum formaldehyde emission of 0.1 parts per million (ppm), while the U.S. Dept. of Labors Occupational Safety & Health Administration allows 0.75 ppm. Rather than parts-per-million, Californias Office of Environmental Health Hazard Assessment recommends 27 parts per billion for formaldehyde emissions; this is the same maximum as for FloorScore certification.

Maintenance and durability are important concerns for both the natural and the indoor environment. A less durable floor will have to be replaced more often, and a high-maintenance floor can expose you to more harmful chemicals. Stone, for example, requires frequent refinishing while other materials, such as linoleum, require little or none.

End of Life

What happens when youre done with your flooring? There are trade-offs here, as well. Synthetic carpet doesnt decay, but increasing amounts of it are recycled into foam padding. Stone takes millions of years to decay, but it can be crushed tomorrow and re-used as aggregate in stone tile or even highways. Linoleum, cork and wood are biodegradable or can be burned for energy.

Materials in depth

See GreenHomeGuides Buyers Guide to Green Floor Materials for a snapshot of eight types of eco-friendly flooring. Following is an in-depth look at each materials pros and cons.


The worlds largest grass, bamboo grows quickly in a wide variety of soils and, depending on the species, can be harvested in a three- to five-year cycle. Bamboo flooring is generally made by slicing bamboo into strips, boiling it in water, laminating it into board, and kiln-drying the resulting material.

Most bamboo flooring comes from the Asia Pacific region, particularly China and Vietnam, which means energy requirements and air emissions for transporting bamboo flooring to North America are significant.

Adhesives used in bamboo flooring sometimes contain a urea-formaldehyde resin, although products that contain minimal or no formaldehyde are available.

Installation is by nailing, stapling or gluing; tongue-and-groove flooring sections can minimize the need for fasteners or adhesives. Ask the installer to conduct as much sawing and sanding as possible outside the home to minimize air quality impacts.

Bamboo flooring is hard (harder than many hardwoods. in fact) and will last for 30 to 50 years. Once removed it will biodegrade in landfills or can be burned for energy.

Resources offers a general description of bamboo floor installation and a short article on bamboo features and benefits .


Stone is nonrenewable. Sought-after stone typesgranite, marble, sandstone, slate, limestone and othersmay need to be transported long distances. However, stones durability amortizes these costs over a long period of time.

Stone is only minimally processed, but quarrying, cutting, polishing and handling this heavy, hard material requires a great deal of energy. Stone quarrying can also affect the surrounding landscape and water tables, and stone saws can throw irritating dust into the air.

Installation typically requires specialized knowledge and stone-cutting and -grinding tools. Ask the installer to conduct as much cutting and grinding as possible outside the home to minimize air quality impacts.

Stone has no emissions profile beyond potential radon emission. Query suppliers to ensure that radon is not a concern with a particular stone type. Select a low-VOC sealer to finish stone flooring, or select stone flooring that does not require sealing.

Stone flooring must periodically be resealed against stainsas often as every year for high-traffic areas. Sealer will evaporate eventually even from unused areas. Beyond this, simply vacuuming a stone floor is enough to maintain its appearance.

Some stone typesparticularly marble, sandstone, limestone and slateare relatively soft and can scratch and absorb stains easily. Granite is harder and more scratch and stain resistant.

Stone flooring can last decades or even centuries, long enough that disposal is a minor issue. Stone can be disposed of safely in bulk, or crushed and reused as aggregate for other building materials, like composite stone tile.

Navigating the Flooring Thicket Find the Greenest Way to Meet Your Needs - Green Home Guide by USGBC


Read more about stone and tile in GreenHomeGuides Stone and Tile Know-How section .

Stone World and Contemporary Stone & Tile Design magazines discuss and promote the use of stone in building and interior design.


Cork is highly renewable, although at a slower rate than bamboo. Even virgin cork is harvested sustainably in several Mediterranean countries. The bark of cork trees can be removed once every 7 to 10 years without harming the tree or its habitat, a process that has been used throughout recorded history. However, energy requirements to transport cork from the Mediterranean are significant.

Cork has a slight smell that most people consider pleasant. Some manufacturers claim their cork flooring is hypoallergenic, but in any case, all-natural cork flooring is preferred over cork-vinyl composites that have a PVC backing. In the past, urea formaldehyde was used to bind cork granules into flooring, but it was phased out in the 1980s. Today, urea melamine, phenol formaldehyde and natural proteins are used as binders instead, greatly reducing VOC problems.

Techniques for installing cork planks or tiles vary from nailing to gluing; take care to choose low-VOC adhesives. Tiles will need to be sealed; a natural wax or low-VOC polyurethane sealer is recommended.

Cork flooring keeps its shape well and is naturally mold, moisture and rot resistant. Its as durable as hardwood flooring. biodegradable and nontoxic (it can even be ground up for compost).


Ceramic and Glass Tile

Ceramic and glass tile have been used as flooring materials for thousands of years. Some recycled-content glass tile is made from lightbulbs, ground glass and auto windshields. Although energy requirements for producing ceramic tile are high, it is durable and produced in many locations from abundant natural clays. Choose tile from a local source to reduce energy used in transporting this heavy material.

Ceramic tile set in cement may be the most acceptable floor in terms of indoor air quality. Its also more durable than tile set using adhesives. Tiles come either glazed (sealed with a smooth finish; highly moisture and stain resistant) or unglazed (somewhat coarser and more porous). Tile glazes are inert since they are baked onto the tiles at high temperatures, but as usual, adhesives should be chosen with care.

Ceramic tile requires some specialized tools and knowledge to cut and install; however, it can be laid with simple Portland cementbased grout, which does not emit vapors and requires very little maintenance. Ask the installer to avoid cutting and grinding tiles inside your home as much as possible.

Ceramic tile will outlast vinyl flooring if properly installed, and it biodegrades after removal. Tiles can be reused and may also be crushed and recycled as aggregate material for sidewalks and roads.


The GreenSpec directorys listings for ceramic tile and recycled glass tile are also available online at


Wood flooring is warm, and recycled woods in particular add warmth to a space because of their years of weathering. Virgin hardwood flooring must be harvested from trees with long growth cycles: red and white oak, maple, and occasionally ash or birch. North American beech is depleted and should be avoided. Growth cycles for softwood flooring, such as pine, are somewhat shorter than for their hardwood cousins. Clear-cutting and overharvesting are concerns, so take care to purchase flooring that is FSC-certified or otherwise sustainably harvested.

The obvious ones [to avoid] are hardwoods that are rare and endangered, which is what most people put in their homes, Mangan says. Brazil cherrywood is popular, and thats not sustainable.

That said, any wood may be sustainably raised and harvested. U.K.-based Friends of the Earth rates woods on their endangered status in cases where no FSC alternative is available.

Increasingly, building suppliers carry salvaged wood, which avoids the energy cost of growing and harvesting new wood (though energy is required to disassemble the source building). Woods long replacement cycle also distributes its environmental impacts over decades.

Laminate flooring combines several layers of materials (typically a laminate, an image layer, a core and a backing) to create an aesthetically pleasing, highly durable surface. Note that while laminate flooring may contain sawdust, wood chips and other re-used wood residues, it may also contain formaldehyde, a known toxin. Look for a FloorScore seal on laminate flooring or check its VOC emissions against one of the other emissions standards in the Use and Maintenance section above.

Hardwood floors are excellent for indoor air quality, but take care in selecting a finish. Its best to buy wood flooring prefinished at the factory, where off-gassing can be handled in a controlled environment.

Wood floors require sealing; try to choose adhesives and sealers that give off few or no VOCs. Wood itself off-gasses only minimally and does not harbor dust mites or mold. Properly finished floors retain only minimal dirt.


The GreenSpec directorys listings for FSC-certified wood flooring and reclaimed wood flooring are also available online at


Linoleum is experiencing a big comeback as an alternative to vinyl tile. In addition to being more environmentally friendly, linoleum also has practical advantages over vinyl: patterns are dyed all the way through to the backing, ensuring even wear; vinyl tiles have a pattern superimposed on them and show wear more dramatically.

Linoleum is a mixture of linseed oil (from flax plants), pine rosin, wood flour, cork flour, limestone and pigments, which form into granules and are pressed together onto a jute backing. All natural linoleum is manufactured in Europe, adding to energy costs for transporting it to North America. (Make sure you look for natural linoleum, as linoleum is sometimes used to refer generically to vinyl flooring.)

In use since the mid-1800s, linoleums chemistry is well-understood, although some have raised concerns about aldehydes off-gassing from linoleums constituent linseed oil. Linoleums faint smell may not be to everyones liking. However, linseed oil is a natural antimicrobial agent, making linoleum a good choice for kitchens.

Linoleum is not recommended for areas where moisture may seep through the underfloor, such as concrete basements; however, its edges can be heat-welded, eliminating seams for greater moisture resistance. Dry cleaning is considered more effective than wet cleaning, so linoleum flooring reduces water waste.


For specific product recommendations, see The Green Guides Flooring Buying Guide and the GreenSpec directory of environmentally preferable building products.

To find low-emitting linoleum and other resilient flooring, see Scientific Certification Systems list of FloorScore certified products.


Rubber is generally used for play areas, outdoors, and in other places where non-slip surfaces are needed, such as kitchens. Virgin rubber is manufactured from latex, the sap of rubber trees, which typically grow in tropical areas. Asia provides most of the worlds natural rubber; rubber can also be produced synthetically .

Several varieties of rubber flooring are made from recycled materials, typically rubber tires, meaning that there are abundant raw materials in North America. Conversion to rubber flooring requires energy but transport costs are generally lower than for imports. Recycled rubber flooring is generally less expensive and more durable than virgin flooring.

Rubbers properties and effects are well understood after more than a century of industrial, commercial and residential use. It is chemically stable, although it does off-gas slightly, giving it a distinctive smell, but emission of toxics is low. Because of its natural tackiness and form-fitting qualities, it can be installed without adhesives, further lessening off-gassing compared with other materials. It is easy to clean, provides good support and is highly durable.

Rubber flooring usually is flammable and some people are allergic to it. Although hypoallergenic products are available, you may be better off using it only outdoors if you have sensitivities.


For specific product recommendations, consult the GreenSpec directory of environmentally preferable building products and Scientific Certification Systems list of low-emitting FloorScore certified products.

Youll find a general introduction to natural rubber on Wikipedia. Google Answers provides further information on rubbers lifecycle .

Carpets & Rugs

Start examining a carpet by looking for the Carpet and Rug Institute seal of approval, called Green Label Plus. For this certification, the CRI has adopted Californias rigorous 01350 standard, which tests for emissions of individual VOCs rather than just the overall level of VOCs.

Synthetic carpeting is commonly criticized for its petroleum-based fibers and the off-gassing of VOCs in the home. Binders still used to make synthetic carpets and padding may outgas for years after installation, with varying levels of emissions and toxicity. Recycled carpeting is made primarily from post-consumer plastic soft-drink containers, while recycled carpet padding can be made from old carpet padding and reclaimed carpet fibers. Amazingly, about 30 percent of all foam cushion used for carpet padding in the United States comes from imported waste fibers.

Natural carpets and rugs can be made from wool, cotton or even grasses with minimal processing and treatment.

Wall-to-wall carpets of all kinds require either an adhesive or the use of stretching and carpet tacks. Because of off-gassing concerns, ask the installer to unroll and air out the carpet in a well-ventilated area before installation, and to use only low-emitting adhesives. Ventilate the installation area as well as possible for 48 to 72 hours afterward.

Once installed, carpet has excellent sound- and thermal-insulating properties. The problem, Mangan says, is that it cant be kept truly clean.

Carpet not only is typically made from petroleum products and doesnt break down ever, but it never gets clean; it just collects dirt and dust and stuff, he says. Its always going to contain whatevers fallen into it.

While carpet is the softest flooring material considered here, it also requires relatively frequent replacement (about every 11 years). Just 4 percent of carpet is recycled, a figure the CRI says will increase to 20 to 25 percent by 2012.


Visit the Green Label Plus website for a list of carpets that have been tested and certified as low-emitting products.

For more product recommendations, consult The Green Guides Carpets Buying Guide and the GreenSpec directory of environmentally preferable building products.

Leave a Reply